How to Measure for Blinds

Inside Mount

Measure the window opening at three different places, (it is best to use a steel tape) use the narrowest dimension when ordering. Be exact! The factory will make the blind slightly narrower so it won't rub against the window casing. Measure the height of the window from the top (soffit) down to the sill. NOTE: The finished blind length may have a tolerance of +1/2" or -1/4"

Outside Mount

Measure exact width and height of the area to be covered, (it is best to use a steel tape). It is recommended that blinds overlap the window opening by at least 1 1/2" on each side to insure privacy and control sunlight. When installation is designed for "no sill," allow the blind to overlap the bottom of the window casing by at least 1 1/2". Blinds will be made to exact measurements given. NOTE: The finished blind length may have a tolerance of +1/2" or -1/4".

HOME | BLINDS | SHUTTERS | FURNITURE | CONTACT US
Copyright © 2008 DWM Design.